Lupus
Narrow high power LED strip
White light from 2200K to 5700K
- Power up to 12W
- LED current up to 1000mA
- Ra 80 and 90
- SDCM 3
- Energy efficiency class E and F
- Easy attachment with thermally conductive tape
- Format 12x250mm
Accessories
- Connection Board with quick contact and pole reversal protection
- Wiring and termination contact
- Drives
Log in to see table of prices.
Product Description
| Color temperature | Warm white | Warm white | Warm white | Neutral white | Cold white |
|---|---|---|---|---|---|
| Color temperature, typ | 2200 | 2700 | 3000 | 4000 | 5700 |
| Right, my | 80 | 90 | 90 | 90 | 90 |
| Light flux, min at 350mA | 432 lm | 412 lm | 412 lm | 456 lm | 496 lm |
| Luminous flux, typ at 700mA | 800 lm | 760 lm | 760 lm | 840 lm | 920 lm |
| Spreading angles | - | - | - | - | - |
| - Real spot (RS) | 18° | 18° | 18° | 18° | 18° |
| - Medium (M) | 24° | 24° | 24° | 24° | 24° |
| - Wide (W) | 31° | 31° | 31° | 31° | 31° |
| - Wide wide (WW) | 36° | 36° | 36° | 36° | 36° |
| - Wide wide wide (WWW) | 45° | 45° | 45° | 45° | 45° |
| - Oval (O) | 19x48 ° | 19x48 ° | 19x48 ° | 19x48 ° | 19x48 ° |
| Whoa, typ at 350mA | 11,3 V | 10,8 V | 10,8 V | 10,8 V | 10,6 V |
| Whoa, typ at 700mA | 11,7 V | 11,2 V | 11,2 V | 11,2 V | 11,0 V |
| RthJ-A | 10 ° C / W | 10 ° C / W | 10 ° C / W | 10 ° C / W | 10 ° C / W |
| Energy efficiency class | F | F | F | F | E |
Color temperature, Kelvin (K)
Documents
Datasheet for Lupus.
Warranty conditions
Lightronics warranty conditions. The terms apply to all products.
Energy Labelling
Label for energy efficiency
Obligations for e-commerce
As a seller of light sources, since September 1, 2021, we are obliged to report the energy class of the light source. The class is shown in a gradation from A to G, where A corresponds to the best efficiency. Through the Energy Labeling, it should make it easier for the user to choose light sources based on their energy efficiency. The energy class is shown at this location through the product's energy label. The energy class and efficiency are also reported in the light source's data sheet, which can be downloaded higher up on this product page.
Energy efficiency classes and calculation method
The energy efficiency class for light sources shall be determined according to Table 1, based on light output based on the power from the mains ηTM, which is calculated by dividing the declared usable luminous flux Φuse (expressed in lm) by declared power consumption in position Pon (expressed in W) and multiplying by applicable FTM in Table 2, i.e. ηTM = (/use / Pon) x FTM (lm / W).
| Energy efficiency class | Light exchange based on the power from the mains ηTM (lm / W) |
|---|---|
| A | 210 ≤ ηtm |
| B | 185 ≤ ηtm <210 |
| C | 160 ≤ ηtm <185 |
| D | 135 ≤ ηtm <160 |
| E | 110 ≤ ηtm <135 |
| F | 85 ≤ ηtm <110 |
| G | ηtm <85 |
Table 1 - Energy efficiency classes for light sources
| Typ of light source | FTM factor |
|---|---|
| Radiant (NDLS), connected to the mains (MLS) | 1,000 |
| Radiant (NDLS), not connected to the mains (NMLS) | 0,926 |
| Directed (DLS), connected to the mains (MLS) | 1,176 |
| Directed (DLS), not connected to the mains (NMLS) | 1,089 |
Table 2 - Factors FTM per typ of light source
