Pop
Circular LED module for constant current supply
Suitable for mounting in round luminaire housings
-
- Light flux up to 360lm at 3,5W
- CCT variation within 3-step MacAdam ellipse
- Color reproduction Ra 80 and 90
- Mounting with screw or thermal tape
- Energy efficiency class E and F
- Format ø30 × 20 mm
| Quantity | Price |
|---|---|
| < 10 (ord. price) | SEK XX.XX |
| >= 10 (20% discount) | SEK XX.XX |
| >= 50 (50% discount) | SEK XX.XX |
Product Description
| Color temperature, typ | 2200K | 2700K | 3000K | 4000K | 5700K |
|---|---|---|---|---|---|
| Ra, typ | 80 | 90 | 90 | 90 | 90 |
| Light flux, min at 700mA | 200 | 190 | 190 | 210 | 230 |
| Light flux, min at 1000mA | 270 | 256 | 256 | 283 | 310 |
| Light flux, min at 1200mA | 313 | 298 | 298 | 329 | 360 |
| Viewing angle Real spot | 8° | 8° | 8° | 8° | 8° |
| Viewing angle Medium | 28° | 28° | 28° | 28° | 28° |
| Viewing angle Wide | 43° | 43° | 43° | 43° | 43° |
| Viewing angle Oval | 9 × 52 ° | 9 × 52 ° | 9 × 52 ° | 9 × 52 ° | 9 × 52 ° |
| Whoa, typ at 700mA | 2,85V | 2,85V | 2,85V | 2,85V | 2,85V |
| Whoa, typ at 1200mA | 2,96V | 2,96V | 2,96V | 2,96V | 2,96V |
| RthJ-A | 4 ° C / W | 4 ° C / W | 4 ° C / W | 4 ° C / W | 4 ° C / W |
Note the following: The table indicates typ-values to be interpreted as reference values. These may deviate from the actual values the product shows when it is in a finished application. Click to read the full text.
Actual values depend on:
1, the min and max range of the value, which can be read using the bin code of the diodes included in the manufacturing batch of the LED module
2, the working temperature range of the final product
3, the operating current.
Care should be taken to verify behavior throughout the work area. If specific bins are desired, this must be communicated with Lightronic before ordering. Availability of desired bin code varies. Contact us for technical information on how bin codes are interpreted. Lightronic is not responsible for actual values deviating from typvalues.
Color temperature, Kelvin (K)
Documents
Warranty conditions
Lightronics warranty conditions. The terms apply to all products.
Energy Labelling
Product information regarding energy efficiency
Label for energy efficiency
Obligations for e-commerce
As a seller of light sources, since September 1, 2021, we are obliged to report the energy class of the light source. The class is shown in a gradation from A to G, where A corresponds to the best efficiency. Through the Energy Labeling, it should make it easier for the user to choose light sources based on their energy efficiency. The energy class is shown at this location through the product's energy label. The energy class and efficiency are also reported in the light source's data sheet, which can be downloaded higher up on this product page.
Energy efficiency classes and calculation method
The energy efficiency class for light sources shall be determined according to Table 1, based on light output based on the power from the mains ηTM, which is calculated by dividing the declared usable luminous flux Φuse (expressed in lm) by declared power consumption in position Pon (expressed in W) and multiplying by applicable FTM in Table 2, i.e. ηTM = (/use / Pon) x FTM (lm / W).
| Energy efficiency class | Light exchange based on the power from the mains ηTM (lm / W) |
|---|---|
| A | 210 ≤ ηtm |
| B | 185 ≤ ηtm <210 |
| C | 160 ≤ ηtm <185 |
| D | 135 ≤ ηtm <160 |
| E | 110 ≤ ηtm <135 |
| F | 85 ≤ ηtm <110 |
| G | ηtm <85 |
Table 1 - Energy efficiency classes for light sources
| Typ of light source | FTM factor |
|---|---|
| Radiant (NDLS), connected to the mains (MLS) | 1,000 |
| Radiant (NDLS), not connected to the mains (NMLS) | 0,926 |
| Directed (DLS), connected to the mains (MLS) | 1,176 |
| Directed (DLS), not connected to the mains (NMLS) | 1,089 |
Table 2 - Factors FTM per typ of light source
