Strong II
Compact high power line module
White light with 3000K or 4000K
- Power max 39W
- LED current max 800mA
- Ra 80
- SDCM 3
- Series connectable
- Easy fastening with screw
- Format 25x80mm
- Energy efficiency class D
Accessories
| Quantity | Price |
|---|---|
| < 50 (ord. price) | SEK XX.XX |
| >= 50 (20% discount) | SEK XX.XX |
| >= 100 (50% discount) | SEK XX.XX |
Product Description
| Color | Warm white | Neutral white |
|---|---|---|
| Color temperature, typ | 3000 | 4000 |
| Ra, my | 80 | 80 |
| Light flux, min at 500mA | 3384 lm | 3583 lm |
| Light flux, typ at 700mA | 4561 lm | 4829 lm |
| Viewing angle | 116° | 116° |
| Vf, typ at 500mA | 46,1 V | 46,1 V |
| Vf, typ at 700mA | 47,9 V | 47,9 V |
| RthJ-A | 1,3 ° C / W | 1,3 ° C / W |
Color temperature, Kelvin (K)
Documents
Data sheet for Stark II
Warranty conditions
Lightronics warranty conditions. The terms apply to all products.
Energy Labelling
Product information regarding energy efficiency
Label for energy efficiency
Obligations for e-commerce
As a seller of light sources, since September 1, 2021, we are obliged to report the energy class of the light source. The class is shown in a gradation from A to G, where A corresponds to the best efficiency. Through the Energy Labeling, it should make it easier for the user to choose light sources based on their energy efficiency. The energy class is shown at this location through the product's energy label. The energy class and efficiency are also reported in the light source's data sheet, which can be downloaded higher up on this product page.
Energy efficiency classes and calculation method
The energy efficiency class for light sources shall be determined according to Table 1, based on light output based on the power from the mains ηTM, which is calculated by dividing the declared usable luminous flux Φuse (expressed in lm) by declared power consumption in position Pon (expressed in W) and multiplying by applicable FTM in Table 2, i.e. ηTM = (/use / Pon) x FTM (lm / W).
| Energy efficiency class | Light exchange based on the power from the mains ηTM (lm / W) |
|---|---|
| A | 210 ≤ ηtm |
| B | 185 ≤ ηtm <210 |
| C | 160 ≤ ηtm <185 |
| D | 135 ≤ ηtm <160 |
| E | 110 ≤ ηtm <135 |
| F | 85 ≤ ηtm <110 |
| G | ηtm <85 |
Table 1 - Energy efficiency classes for light sources
| Typ of light source | FTM factor |
|---|---|
| Radiant (NDLS), connected to the mains (MLS) | 1,000 |
| Radiant (NDLS), not connected to the mains (NMLS) | 0,926 |
| Directed (DLS), connected to the mains (MLS) | 1,176 |
| Directed (DLS), not connected to the mains (NMLS) | 1,089 |
Table 2 - Factors FTM per typ of light source
